Soap Extruder Disks Stainless Steel Soap Maker Kit SET 37 Discs for Handmade Soap Design DIY Sculpture Soap Making Tool Supplies
Material: stainless steel

37 Discs SET A: 1pc Soap extruder + 37pcs discs on the picture (Default A01-A37) + 5pcs basic discs + 3pcs divided discs + 1pc storage book

Pattern Discs - Diameter 5.2cm
Customzied Patterns available.

Must read! Precautions for soap squeezer:
1. In order to make the extruded soap bar smoother? It is recommended to use a more malleable soap mud formula:
Coconut oil 30% Castor oil 20% Palm oil 19% Sweet almond oil 15% Cocoa butter 10% Shea butter 6% Alkali reduction 5%
2.4 times the amount of water
Don't keep warm, avoid too hard

2. After making the soap, pour it directly into a disposable cup or a special silicone mold for the soap squeezer. It is recommended to start using it after three days.

3. When in use, a baffle can be installed to block the holes that do not need to be squeezed. The installation sequence of the baffle is as follows: the baffle is inside and the die is outside, screw the baffle and the soap squeezing plate together with screws and nuts, and put the nuts on the outside after covering the soap dispenser cover.

4. The part of the soap bar just squeezed out will curl up, and the longer it will be, the straighter it will be. (So when making large-size patterns, use as much soap as possible to squeeze out longer bars and straighten them while squeezing them). After the squeezed soap bars are cut off with a string knife, they are broken and straightened manually. . Knead the remaining part into a ball and put it in an aluminum foil ziplock bag for next time.

5. The soap squeezing board must be cleaned before use. The edge of the mud squeeze tube is sharp. Do not press directly with your hands when using it. Please use a bottle brush when cleaning. Do not use your hands as it is easy to cut. The lids on both ends of the soap squeezer are detachable for easy cleaning of the inside.